Mercedes-Benz

Home / Mercedes-Benz

We Service and Repair all Mercedes-Benz cars

  • 2013 Mercedes-Benz SLK55

    Mercedes-Benz SLK55
    Mileage
    39,305
    Service Date
    9/15/2025
    Services Performed
    • Lube, Liqui-Moly Oil, Filter Service; Removal and replacement of existing engine oil and oil filter, Engine oil provides lubrication, cooling and cleaning to the internal parts of the engine. Engine oil degrades as it becomes dirty and contaminated from normal engine operation. The engine oil filter helps to protect the machined surfaces and bearings in an engine by removing particles from the engine oil. Not changing the oil and filter on a vehicle at the recommended intervals can lead to excessive engine wear and eventually engine failure. Replacing the engine oil and filter when recommended ensures proper and efficient engine performance and prolongs the life of the engine. Check the air filter, Check all fluids under the hood, Check engine for leaks, Check belts and hoses, Check tire pressure, Check undercarriage.
     
    Jeremiah C. gave our service a 5 star review on 9/16/2025
  • 2018 Mercedes-Benz S560

    Mercedes-Benz S560
    Mileage
    48,286
    Service Date
    9/3/2025
    Services Performed
    • TPMS Sensor Loose – Break Down Tire & Install Sensor Correct Tire Pressures
     
    Chrisy & Greg S. gave our service a 5 star review on 9/3/2025
  • 2015 Mercedes-Benz GLA250

    Mercedes-Benz GLA250
    Mileage
    71,956
    Service Date
    7/29/2025
    Services Performed
    • SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include alignment.]
    • Set Camber, Caster, & Toe: Camber is the angle of the wheel, measured in degrees, if the top of the wheel is tilted out then the camber is positive, if it's tilted in, then the camber is negative. Caster is the angle of the steering pivot, measured in degrees. Toe is the most critical alignment settings relative to tire wear. if the toe setting is just 1/32-inch off of its appropriate setting, each tire on that axle will scrub almost 3 1/2 feet sideways every mile, therefore reducing tire life.
     
    Evelyn L. gave our service a 5 star review on 7/30/2025
  • 2019 Mercedes-Benz CLA250

    Mercedes-Benz CLA250
    Mileage
    74,385
    Service Date
    5/21/2025
    Services Performed
    • The first Service A is due at 10000 miles or 12 months, then every 20000 miles or 24 months. TIRE PRESSURE MONITORING SYSTEM SENSORS – ACTIVATE BRAKE FLUID – INSPECT – [In the event of fluid loss, determine cause and perform repair.] BRAKE SYSTEM – INSPECT – [Visually check condition of brake pads/linings, condition of brake disks.] COOLANT LEVEL – INSPECT – [Check coolant level in coolant expansion tank.] HORN OPERATION – INSPECT – [Check horn for correct function.] PARKING BRAKE – INSPECT – [Function test only: Vehicles with 4MATIC: If brake test is carried out on a dynamometer, the brake test may not exceed 10 seconds on each axle. You could otherwise damage the drive train or the brake system.] TIRES – INSPECT – [Correct tire inflation pressure, Correct inflation pressure in spare tire (where applicable). Check TIREFIT sealant expiration date (where applicable). If expired, replace it. Activate Tire Pressure Monitoring System.] TRUNK LIGHTING – INSPECT – [Check trunk/cargo compartment lighting for correct function.] VEHICLE – INSPECT – [Check vehicle's exterior for damage in visible area.] WARNING & INDICATOR LAMPS – INSPECT – [Inspect warning and function indicator lamps in the instrument cluster. Check illumination of the instrument cluster and interior lighting for correct function.] WINDSHIELD – INSPECT – [Check for damage.] AIR FILTER – REPLACE – Activated Charcoal Filter ENGINE OIL – REPLACE ENGINE OIL FILTER – REPLACE SERVICE INTERVAL INDICATOR/DISPLAY – RESET – [Read out service data from instrument cluster and reset ASSYST PLUS service interval display. If the service/maintenance work has not, or has only partially been carried out after the ASSYST PLUS service interval display has been reset, the maintenance computer must be reset to its original settings.]
    • Lube, Full Synthetic Oil, Filter Service; Removal and replacement of existing engine oil and oil filter, Engine oil provides lubrication, cooling and cleaning to the internal parts of the engine. Engine oil degrades as it becomes dirty and contaminated from normal engine operation. The engine oil filter helps to protect the machined surfaces and bearings in an engine by removing particles from the engine oil. Not changing the oil and filter on a vehicle at the recommended intervals can lead to excessive engine wear and eventually engine failure. Replacing the engine oil and filter when recommended ensures proper and efficient engine performance and prolongs the life of the engine. Check the air filter, Check all fluids under the hood, Check engine for leaks, Check belts and hoses, Check tire pressure, Check undercarriage
    • Flush Brake System; Replenish With BG Performance Fluids to OE Specifications, Bleed System. Inspect For Leaks & Test Functions.
    • Preform BG Performance Cooling System Service; Visually Inspect Hoses, Add CoolingSystem Cleaner, Flush Cooling System, and Replenish Coolant to OE Specifications, Bleed System.
    • TIRE PRESSURE MONITORING SYSTEM SENSORS – ACTIVATE PANORAMA SLIDING ROOF – CLEAN – [Clean and lubricate guide mechanism. This maintenance item has been extended by Mitchell1 based on OEM patterns.] AXLE – INSPECT – [Check condition of front/rear axles and front/rear axle ball joints.] BRAKE FLUID – INSPECT – [In the event of fluid loss, determine cause and perform repair.] BRAKE SYSTEM – INSPECT – [Visually check condition of brake pads/linings, condition of brake disks.] COOLANT LEVEL – INSPECT – [Check coolant level in coolant expansion tank.] ENGINE COMPARTMENT – INSPECT – [Check all visible parts in the engine compartment for damage and leaks. In the event of fluid loss, determine cause and perform repair.] EXTERIOR LAMPS – INSPECT – [Check exterior lighting for correct function. Check and correct headlamp setting: Xenon or LED headlamps.] HORN OPERATION – INSPECT – [Check horn for correct function.] PARKING BRAKE – INSPECT – [Function test only: Vehicles with 4MATIC: If brake test is carried out on a dynamometer, the brake test may not
     
    Barbara D. gave our service a 5 star review on 5/22/2025
  • 2015 Mercedes-Benz GLA250

    Mercedes-Benz GLA250
    Mileage
    71,222
    Service Date
    5/15/2025
    Services Performed
    • The first Service A is due at 10000 miles or 12 months, then every 20000 miles or 24 months. TIRE PRESSURE MONITORING SYSTEM SENSORS – ACTIVATE BRAKE FLUID – INSPECT – [In the event of fluid loss, determine cause and perform repair.] BRAKE SYSTEM – INSPECT – [Visually check condition of brake pads/linings, condition of brake disks.] COOLANT LEVEL – INSPECT – [Check coolant level in coolant expansion tank.] HORN OPERATION – INSPECT – [Check horn for correct function.] PARKING BRAKE – INSPECT – [Function test only: Vehicles with 4MATIC: If brake test is carried out on a dynamometer, the brake test may not exceed 10 seconds on each axle. You could otherwise damage the drive train or the brake system.] TIRES – INSPECT – [Correct tire inflation pressure, Correct inflation pressure in spare tire (where applicable). Check TIREFIT sealant expiration date (where applicable). If expired, replace it. Activate Tire Pressure Monitoring System.] TRUNK LIGHTING – INSPECT – [Check trunk/cargo compartment lighting for correct function.] VEHICLE – INSPECT – [Check vehicle's exterior for damage in visible area.] WARNING & INDICATOR LAMPS – INSPECT – [Inspect warning and function indicator lamps in the instrument cluster. Check illumination of the instrument cluster and interior lighting for correct function.] WINDSHIELD – INSPECT – [Check for damage.] ENGINE OIL – REPLACE ENGINE OIL FILTER – REPLACE SERVICE INTERVAL INDICATOR/DISPLAY – RESET – [Read out service data from instrument cluster and reset ASSYST PLUS service interval display. If the service/maintenance work has not, or has only partially been carried out after the ASSYST PLUS service interval display has been reset, the maintenance computer must be reset to its original settings.]
    • Lube, Full Synthetic Oil, Filter Service; Removal and replacement of existing engine oil and oil filter, Engine oil provides lubrication, cooling and cleaning to the internal parts of the engine. Engine oil degrades as it becomes dirty and contaminated from normal engine operation. The engine oil filter helps to protect the machined surfaces and bearings in an engine by removing particles from the engine oil. Not changing the oil and filter on a vehicle at the recommended intervals can lead to excessive engine wear and eventually engine failure. Replacing the engine oil and filter when recommended ensures proper and efficient engine performance and prolongs the life of the engine. Check the air filter, Check all fluids under the hood, Check engine for leaks, Check belts and hoses, Check tire pressure, Check undercarriage
    • Flush Brake System; Replenish With BG Performance Fluids to OE Specifications, Bleed System. Inspect For Leaks & Test Functions.
    • Attach Diagnostic Equipment and Memory Saver: Test Charging System – Alternator, Battery, & Starter. Clean Terminals & Replace Battery. *See Report* (Register Battery & Clear Codes As Applicable)
    • Perform BG Performance Induction Service: Clean fuel injectors, Clean throttle body, Clean plenum and air-intake, Clean intake valves and ports,Remove combustion chamber deposits, Correct balance of fuel and air in system.
    • Preform BG Performance Cooling System Service; Visually Inspect Hoses, Add CoolingSystem Cleaner, Flush Cooling System, and Replenish Coolant to OE Specifications, Bleed System.
    • Perform Transmission Service; Flush System and Replenish Fluids to OE Specifications, ***Replace Pan Gasket & Filter As Applicable*** Transmission fluid provides lubrication, cooling and cleaning to various parts of the transmission The transmission fluid filter (if equipped) helps to prolong the life of the fluid by removing larger particles, but eventually the fluid and filter need to be changed. Dirty transmission fluid can cause shifting problems, premature component wear, transmission failure, and reduced fuel economy. Replacing the transmission fluid and filter at the recommended intervals helps ensure the transmission operates properly and prevents premature failure of
     
    Evelyn L. gave our service a 5 star review on 5/15/2025
  • 2021 Mercedes-Benz GLE350

    Mercedes-Benz GLE350
    Mileage
    62,029
    Service Date
    5/13/2025
    Services Performed
    • Attach Diagnostic Equipment and Memory Saver: Test Charging System – Alternator, Battery, & Starter. Clean Terminals & Replace Battery. *See Report* (Register Battery & Clear Codes As Applicable)
     
    Sharon L. gave our service a 5 star review on 5/13/2025
  • 2018 Mercedes-Benz GLE350

    Mercedes-Benz GLE350
    Mileage
    41,543
    Service Date
    4/28/2025
    Services Performed
    • Lube, Full Synthetic Oil, Filter Service; Removal and replacement of existing engine oil and oil filter, Engine oil provides lubrication, cooling and cleaning to the internal parts of the engine. Engine oil degrades as it becomes dirty and contaminated from normal engine operation. The engine oil filter helps to protect the machined surfaces and bearings in an engine by removing particles from the engine oil. Not changing the oil and filter on a vehicle at the recommended intervals can lead to excessive engine wear and eventually engine failure. Replacing the engine oil and filter when recommended ensures proper and efficient engine performance and prolongs the life of the engine. Check the air filter, Check all fluids under the hood, Check engine for leaks, Check belts and hoses, Check tire pressure, Check undercarriage
    • Attach Diagnostic Equipment and Memory Saver: Test Charging System – Alternator, Battery, & Starter. Clean Terminals & Replace Battery. *See Report* (Register Battery & Clear Codes As Applicable)
    • Preform BG Performance Cooling System Service; Visually Inspect Hoses, Add CoolingSystem Cleaner, Flush Cooling System, and Replenish Coolant to OE Specifications, Bleed System.
    • Mount & Balance 4 Tires Replace Tire Weights & Valve Stems As Needed Reprogram & Reset TPMS System
    • Set Camber, Caster, & Toe: Camber is the angle of the wheel, measured in degrees, if the top of the wheel is tilted out then the camber is positive, if it's tilted in, then the camber is negative. Caster is the angle of the steering pivot, measured in degrees. Toe is the most critical alignment settings relative to tire wear. if the toe setting is just 1/32-inch off of its appropriate setting, each tire on that axle will scrub almost 3 1/2 feet sideways every mile, therefore reducing tire life.
     
    Beth L. gave our service a 5 star review on 4/29/2025
  • 2013 Mercedes-Benz GLK350

    Mercedes-Benz GLK350
    Mileage
    100,393
    Service Date
    3/27/2025
    Services Performed
    • Lube, Full Synthetic Oil, Filter Service; Removal and replacement of existing engine oil and oil filter, Engine oil provides lubrication, cooling and cleaning to the internal parts of the engine. Engine oil degrades as it becomes dirty and contaminated from normal engine operation. The engine oil filter helps to protect the machined surfaces and bearings in an engine by removing particles from the engine oil. Not changing the oil and filter on a vehicle at the recommended intervals can lead to excessive engine wear and eventually engine failure. Replacing the engine oil and filter when recommended ensures proper and efficient engine performance and prolongs the life of the engine. Check the air filter, Check all fluids under the hood, Check engine for leaks, Check belts and hoses, Check tire pressure, Check undercarriage
     
    John C. gave our service a 5 star review on 3/27/2025
  • 2011 Mercedes-Benz E350

    Mercedes-Benz E350
    Mileage
    148,640
    Service Date
    3/14/2025
    Services Performed
    • TIRE PRESSURE MONITORING SYSTEM SENSORS – ACTIVATE – Recommended Service Work TIRE SEALANT – CHECK – Recommended Service Work – [Check TIREFIT sealant expiration date (where applicable).] TIRE PRESSURE – CORRECT – [Includes spare tire.] DIESEL EXHAUST FLUID – FILL BATTERY – INSPECT – Recommended Service Work – [Inspect battery (main/starter/auxiliary) check condition using "Midtronics MCR 717" tester.] BRAKE FLUID – INSPECT BRAKE PADS – INSPECT – [Check thickness of brake pads, front and rear.] BRAKE SYSTEM – INSPECT – Recommended Service Work – [Visually check brake system components, lines, hoses, calipers. Check thickness of brake pads and disks, front and rear wheels removed.] CATCH, SAFETY CATCH AND HINGES ON ENGINE HOOD – INSPECT COOLANT LEVEL – INSPECT HEADLAMP CLEANING SYSTEM – INSPECT – Recommended Service Work HORN, HEADLAMP FLASHERS, HAZARD FLASHERS, TURN SIGNALS – INSPECT – Recommended Service Work POWER STEERING FLUID – INSPECT TIRES – INSPECT – Recommended Service Work – [Inspect tires for damage, measure tread depth.] TRUNK LIGHTING – INSPECT – Recommended Service Work WARNING & INDICATOR LAMPS – INSPECT – Recommended Service Work WATER DRAIN – INSPECT – [Check water drain in air/water duct for obstructions; clean if soiled.] WINDOW WASHER FLUID LEVEL – INSPECT COOLANT – REPLACE ENGINE OIL & FILTER – REPLACE FUEL FILTER – REPLACE WIPER BLADES – REPLACE – Recommended Service Work MAINTENANCE MINDER LIGHT – RESET TIRES – ROTATE – Recommended Service Work – [When the vehicle is configured with staggered sizes (different tire sizes, front vs. rear), tire rotations are not possible.]
    • Replace if more than 150,000 miles or 180 months since last replacement. COOLANT – REPLACE FUEL FILTER – REPLACE
    • Lube, Liqui-Moly Oil, Filter Service; Removal and replacement of existing engine oil and oil filter, Engine oil provides lubrication, cooling and cleaning to the internal parts of the engine. Engine oil degrades as it becomes dirty and contaminated from normal engine operation. The engine oil filter helps to protect the machined surfaces and bearings in an engine by removing particles from the engine oil. Not changing the oil and filter on a vehicle at the recommended intervals can lead to excessive engine wear and eventually engine failure. Replacing the engine oil and filter when recommended ensures proper and efficient engine performance and prolongs the life of the engine. Check the air filter, Check all fluids under the hood, Check engine for leaks, Check belts and hoses, Check tire pressure, Check undercarriage.
    • Preform BG Performance Cooling System Service; Visually Inspect Hoses, Add CoolingSystem Cleaner, Flush Cooling System, and Replenish Coolant to OE Specifications, Bleed System.
    • Attach Diagnostic Equipment and Memory Saver: Test Charging System – Alternator, Battery, & Starter. Clean Terminals & Replace Battery. *See Report* (Register Battery & Clear Codes As Applicable)
     
    Lenny N. gave our service a 5 star review on 3/15/2025
  • 2018 Mercedes-Benz GLA250

    Mercedes-Benz GLA250
    Mileage
    62,510
    Service Date
    1/9/2025
    Services Performed
    • Attach "MB" Computer Diagnostic System To Pull Codes: -See Attached Report- Right Front ABS Sensor Faulty – Replace & Clear Codes Replace Both Rear ABS Sensors – Test Drive. OK
     
    Colleen G. gave our service a 5 star review on 1/9/2025