Services Performed
- VALVE CLEARANCE – ADJUST – [Adjust only if noisy.] BRAKE HOSES & LINES – INSPECT – [Check the master cylinder and VSA modulator-control unit for damage and leakage.] DRIVESHAFT/PROPELLER SHAFT DUST BOOTS – INSPECT – [Check boots for cracks and boot bands for tightness.] EXHAUST SYSTEM – INSPECT – [Check catalytic converter heat shields, exhaust pipes, and muffler for damage, leaks, and tightness. NOTE: According to state and federal regulations, failure to do this maintenance item will not void the customer's emissions warranties. However, Honda recommends that all maintenance services be done at the recommended interval, to ensure long-term reliability.] FLUID & LUBRICANT LEVELS – INSPECT FRONT & REAR BRAKES – INSPECT – [Check pads and discs for wear (thickness), damage, and cracks. Check calipers for damage, leaks, and tightness of mounting bolts.] FUEL LINES & CONNECTIONS – INSPECT – [Check for loose connections, cracks, and deterioration; retighten loose connections and replace damaged parts. NOTE: According to state and federal regulations, failure to do this maintenance item will not void the customer's emissions warranties. However, Honda recommends that all maintenance services be done at the recommended interval, to ensure long-term reliability.] STEERING COMPONENTS – INSPECT – [Inspect tie rod ends, steering gearbox, and gearbox boots. Check steering linkage, boots for damage and leaking grease. Check fluid lines for damage or leaks.] SUSPENSION COMPONENTS – INSPECT – [Check bolts for tightness. Check condition of ball joint boots for deterioration and damage.] ENGINE OIL – REPLACE ENGINE OIL FILTER – REPLACE MAINTENANCE MINDER LIGHT – RESET – [Reset the Maintenance Minder Light after every service is performed. If the Light is reset without performing a service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.]
- Lube, Full Synthetic Oil, Filter Service; Removal and replacement of existing engine oil and oil filter, Engine oil provides lubrication, cooling and cleaning to the internal parts of the engine. Engine oil degrades as it becomes dirty and contaminated from normal engine operation. The engine oil filter helps to protect the machined surfaces and bearings in an engine by removing particles from the engine oil. Not changing the oil and filter on a vehicle at the recommended intervals can lead to excessive engine wear and eventually engine failure. Replacing the engine oil and filter when recommended ensures proper and efficient engine performance and prolongs the life of the engine. Check the air filter, Check all fluids under the hood, Check engine for leaks, Check belts and hoses, Check tire pressure, Check undercarriage
- VALVE CLEARANCE – ADJUST – [Adjust only if noisy.] DRIVE BELTS – INSPECT – [Look for cracks and damage, then check the position of the drive belt auto-tensioner indicator.] AIR CLEANER ELEMENT – REPLACE – [If the vehicle is driven primarily in dusty conditions, replace every 15,000 miles (24,000 km).] CABIN AIR FILTER – REPLACE – [If the vehicle is driven mostly in areas that have high concentrations of dust, pollen, or soot in the air, replace every 15,000 miles (24,000 km). Replace the filter whenever airflow from the heating and air conditioning system is less than normal.] MAINTENANCE MINDER LIGHT – RESET – [Reset the Maintenance Minder Light after every service is performed. If the Light is reset without performing a service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.]
Maryalice A. gave our service a 5 star review on 12/16/2024
